A cohesive force

a-cohesive-force
a-cohesive-force

In all industries trade associations can provide valuable resource and insight for their members, and this is especially true for one as fragmented as

multifarious as composites. Simon Lott speaks to Composites UK chairman Chris Little and secretary Dr Sue Halliwell about how it is helping the UK maintain and develop world class capability.
Could you give a brief history of Composites UK and tell me how it has grown into a highly active and leading trade association in the last few years?

Established in 1989 as The Composites Processing Association, the group was rebranded in 2007 to Composites UK to better reflect the broad membership base and remit the group had developed as the trade association for the whole UK sector. The group represents the whole supply chain from research and development organisations through to materials suppliers, manufacturers and end users. Our key objective is to support the UK composites industry with advice on technical and legislative issues in order for it to continue to grow and to compete in the competitive world of global composites production. To do this our mission is to encourage the safe and effective use of composite materials across all industry sectors. Governed by a board of directors, the main activities of the Association include providing technical support including benchmarking, health and safety, training and skills and technology; raising the profile of composites by providing links to other industries and academic bodies; identifying key funding opportunities with bodies such as UKTI (UK Trade & Investment) based on collaboration and research; and dissemination of information through our website, newsletter, annual conference and workshops. Our member directory is an invaluable online tool to search for expertise, materials, manufacturers etc in specific areas. With over 100 members in the UK, the association is a strong industry voice.

What are the benefits of membership?

The membership profile for Composites UK represents the complete supply chain and ranges from the small one or two man company to the largest multi-nationals.

One of the key benefits of membership is inclusion in the membership database – this is an online tool available through the public part of our website and enables the user to locate members with specific capability, knowledge and expertise. It is also the tool we use for handling enquiries that come in through the helpdesk. In addition, members receive substantial discounts on events offering them excellent networking opportunities and links to industry experts; discounts on training courses run through two of our accredited training providers; the opportunity to exhibit through the collaborative Composites UK stand at trade shows; free copies of Composites UK publications and the opportunity to contribute to the electronic newsletter, which has a wide distribution.

How would you characterise the current UK composites sector? What trends are you seeing in the use of composites in this country and what are our strengths and weaknesses?

Composites UK was involved with the development of the UK Composites Strategy, which was published under the previous Government. This work suggests that UK comparative advantage will continue to be built around our key strengths in the design and delivery of high value added goods and services, based on technology and skills such as advanced manufacturing. The fragmentation of global supply chains means that many British firms are now more likely to produce and trade in intermediate goods rather than finished consumer products. By investment in equipment, combined with UK expertise in design, innovation and technology, UK companies can produce cost-effective, first class composite products to compete with the best in the market.

Several major sector opportunities exist: wind energy (particularly offshore); wave and tidal energy; aerospace (through demand for lower emissions); automotive (crucial to a low carbon economy); marine (manufacturing developments which offer increased cost and performance benefits); oil and gas; construction (particularly new build projects in residential and non-residential buildings and bridges); and satellite construction.

What initiatives is Composites UK currently involved in and how is it interacting with the new Government to ensure the UK composites sector is making the most of its potential?

The UK already has a developed expertise in using composites in many industries, in particular in aerospace and motorsport, but there is room for improvement. Activity has been sector specific which has limited the development of a cohesive composites industry and the transfer of technology to the manufacture of other products in other sectors which could be built using composites. In addition, the UK composites industry is still somewhat fragmented, which has resulted in co-ordination failures as few firms have the critical mass to invest in equipment to make composite structures at the speed and cost industry requires. This is a challenge that Composites UK is working to address, collaborating with the National Composites Centre (NCC), government departments and National Centres of Excellence.

Alongside this there is a shortage of the necessary skills at nearly all levels. Again, Composites UK is actively involved with the National Skills Academy and sector skills councils to develop a National Skills Academy for Composites.

With a focus on developing a more efficient process industry, Composites UK is also working with the Carbon Trust through the Industrial Energy Efficiency Project to help companies reduce waste, improve energy efficiency and minimise costs.

What elements of the industry are Composites UK most eager to develop? With which technologies or initiatives can the UK sector be a world leader?

There are three key industry elements that Composites UK is most eager to develop in collaboration with government, the NCC and other bodies. These are:
1. Strengthening capability through an increased awareness in the UK and overseas of the UK strengths and capabilities in composites. In addition it is critical we develop skills.
2. Building capacity through improved manufacturing capability, particularly controlled, rapid and automated processes such as resin infusion, tape ply laying etc.
3. Increase sustainability and recycling within the sector. The UK is leading research and development in this area with, for example, the world’s first commercial carbon fibre recycling facility and material developments based on natural fibre and resins.

There are changes coming up regarding Governmental health and safety regulations. Could you explain a little about this and how Composites UK is involved?
The Health and Safety Executive has highlighted the polymer sector in respect of its revitalising H&S initiative (RHS). A steering committee involving Composites UK has been formed. The initiative intends to promote the recording of accident statistics by sector, progressive reduction in accident rates and the establishment of proactive safety management systems. The initiative will launch in October 2010.

Composites UK made sure that as an industry we are one step ahead of the game rather than waiting for possibly inappropriate systems to be imposed on us, and have been compiling accident statistics by quarter for the composites sector since July 1st 2009. www.compositesuk.co.uk

Related Articles

Taking the initiative

As well as throwing its full support behind The Composites Engineering Show with intelligence briefings and application forums, Composites UK is also promoting two important projects
12 years ago Features

Advancing UK capabilities

The National Composites Centre, established as part of the Government's UK Composites Strategy will open its doors in summer 2011, bringing together academics and dynamic
13 years ago Features
Most recent Articles

Exel secures deal with Chinese bus builder

Finnish composite manufacturer Exel Composites has secured a new project with Chinese automotive manufacturer Foton Bus and Coach Company to supply pultruded glass fibre composite profiles.
22 hours ago News

Zünd establishes branch in Australia

Zünd Systemtechnik has announced the establishment of its own branch in Australia. Zund Australia will be based in Melbourne serving existing and new customers from all areas of application in which Zünd is active.
2 days ago News

Login / Sign up